One of the best ways to make your walkway or backyard look more aesthetic is by adding stone pavers. However, maintaining them and cutting them in proper shapes can indeed be a little hassle-some.
For this task, what you will be needing is the right tool. And which tool could possibly be a better fit than an electric tile saw? This equipment is versatile- that is, it can be used for multiple purposes, and cutting stone pavers is one of those purposes.
Tiles and stones are distinct in nature. Hence, they should be cut and treated differently. To make sure you cut the pavers as perfectly as possible, you need to follow the instructions properly.
That is why we are here to provide you with ample information regarding this. Starting from what you will be needing to cut the pavers to how you should be cutting them, we will be filling you with everything.
However, if you need more information regarding electric tile saws, then you can check out what Sawreviewed wrote in a blog post.
Things to Consider Before Cutting Stone Pavers
Electric tile saws are sturdy tools. As a result, they can easily cut or work with heavy-duty materials, such as natural stone and ceramic.
However, like any other type of saws, whether or not they can cut stone pavers properly depends on the blade.
The Correct Blade
So, the first thing that you will actually need to cut the pavers is a suitable blade. If the blade at your home is already capable of cutting stone, then there’s no need to fret. But, if that’s not the case, then make sure you go to the store right away and select the correct diamond blade.
If you don’t get the correct type of blade, then that might end up creating some issues. For instance, the blade will wear out faster, which will either require you to sharpen the blade every now and then or change it.
Moreover, your blade might end up melting as well. That would definitely be quite unpleasant, but still, not the end of the world. This might happen if the diamond particles end up melting due to wearing out fast.
On the other hand, it might crack or chip during work. If the blade isn’t strong enough or sharp enough for the material it is cutting, then there’s a high possibility of this happening.
But the worst-case scenario would be if the blade overheats. Overheating can cause some safety hazards, which you should avoid at all costs. Hence, even if getting the right blade isn’t absolutely necessary, it is still highly recommended.
Avoid Safety Hazards
At all steps of the task, you need to be very careful. After all, you are working with a tool that can cause serious injuries. So, you can never be too cautious.
There are some general precautions to keep in check. For instance, electric shocks, damage to blade or slips, and trips. For that, you need to maintain the tool properly and follow the instructions when carrying out the task.
On the other hand, there are some precautions to take care of before you start cutting. You need to check the cutting blade as well as the water flow. If any of these are damaged, then you might face some serious hazards.
Finally, you should be most careful during the cutting process. Make sure your hands don’t get injured, and also do not force the pavers into the saw. The blade will cut at its own speed.
How to Cut Stone Pavers?
Now that you are aware of all the things you need to take care of before and during the task let’s move to the actual process.
Before you start cutting any material with a saw, you should wear protective gear and shoes. Make sure not to wear any pieces of jewelry or accessories that might get into the middle of work. Also, don’t forget to keep all your hair tied back.
Draw a Line
If there isn’t a line to guide you, then you might get lost along the way. Which is why drawing a line is essential. At first, determine the portion that you will be cutting and the shape of it. Then, use a grease pen or chalk to mark the cutting line.
Afterward, make sure the power of the saw is turned off. Then, using the cutting blade, mark the line. Once you are done with this step, you can finally start cutting.
If your stone pavers are thin enough, then you can proceed to cut them as you’d cut tile. The process is not really that different, as long as all the other factors are properly checked up with.
However, pavers are usually a little thick. That is not something to be worried about, though. If they are thick, then cut them in two passes. In the first pass, you should cut halfway through, and in the second pass, cut all of it.
But, that too depends on the cutting depth of the saw. So, before you start cutting, make sure to check the manual of the tool, which will definitely provide the information of its cutting depth.
Afterward, cut according to that depth. If the pavers are too thick, then you might as well need three passes, but the process will remain similar nevertheless.
You might have the false idea of this task is for professionals only. That is because you can easily pull it off yourself.
Cutting stone pavers doesn’t necessarily require any skill, but it is essential for you to be confident. If you are nervous, then you might end up making mistakes that might cause injuries and hazards.
After all, the task isn’t all that hassle-some, and you might even enjoy it if you have taken all the necessary preparations. Hence, ultimately, it all depends on your confidence level and how much you have prepped for it.